About this document
5
Building Technologies A6V10265083_a_en_--
Fire Safety & Security Products 03.2010
1 About this document
Purpose and scope
This document describes the installation, function, commissioning, maintenance,
troubleshooting and disposal of the product FC10xx. The consistent observance of
the instructions ensures a trouble-free and safe application.
Application area
The information in this document applies from the hardware / software version 6.1.
Target group
This documentation and the instructions therein are intended for the following
group(s) of persons who perform the tasks mentioned and have had the corre-
sponding training.
Group of persons Activity Qualification
Product Manager (PM)
He is in charge of local product management and is respon-
sible for the interchange of information between the plant
supplying the equipment and his DU for his product line. He
co-ordinates the flow of information between the individual
groups of people for the various projects.
He has had training appropriate to his function
and product range and has attended the product
manager training course.
Project Manager
The project manager is responsible for the local project
management. He co-ordinates the schedules of all groups of
people working on a project as well as resources. He also
continuously obtains the technical information required for
project realization.
He has had the technical training appropriate to
his function and the size of a project or the prod-
uct line used in the project and has attended the
training courses for project managers at the
supplier's works.
Project Engineer
Provides the parameterization of products, devices and
systems in the DU for a specific country or customer. He
monitors the serviceability and gives the go-ahead for the
commissioning of products, devices and systems at the place
of installation. He is also responsible for trouble-shooting.
He has had the training appropriate to his func-
tion and to the products, devices and systems to
be parameterized and has attended the technical
training courses for project engineers at the
supply plant.
Commissioning per-
sonnel
The configuration of the products, devices or systems for
specific customers at the place of installation. They check
serviceability and officially clear the product, device or sys-
tem for use by the operator / customer. They are also re-
sponsible for trouble-shooting.
They have had the training appropriate to their
function and to the commissioning of the prod-
ucts, devices or systems and have attended the
technical training courses for commissioning
personnel.
Maintenance Person-
nel
They carry out all the maintenance work indicated in the
product documentation and check equipment for total ser-
viceability.
They have had the technical training appropriate
to their function and the product.
Operational and safety regulations
Before groups of persons begin work on the system they must have read and understood the related
documents, in particular Chapter 2 Safety regulations.
Disregard of the safety regulations
The products are designed for an appropriate use and were tested for faultless
functioning. Siemens disclaims all liability for damage or personal injuries caused
by the incorrect application of the instructions or disregard of warnings of danger
contained in the documentation. This applies in particular to:
Personal injuries or damage caused by improper use and incorrect use;
Personal injuries or damage caused by disregarding information relevant for
safety in the documentation or on the product;
Personal injuries or damage caused by poor maintenance or a lack of mainte-
nance.
To Next Page
Loading...
Need help?
General
