Siemens FC1008-A - Step 24, Display Switching Time; Step 25, Switching Mode Summer;Winter Time; Step 26, Switching Time Manned;Unmanned

Configuration
39
Building Technologies A6V10265083_a_en_--
Fire Safety & Security Products 03.2010
8.3.19 Step 24, display switching time
LED zone 1 LED zone 2 Option Setting Key
Red yellow red yellow
Function: Display of switching time after manual switch from manned to unmanned
1 switching time displayed Default off
2 switching time not displayed
zone 1
on
8.3.20 Step 25, switching mode summer/winter time
LED zone 1 LED zone 2 Option Setting Key
red yellow red yellow
Function: Switching summer/winter time and vice versa automatically
1 automatic switching from summer to winter
time
Default off
2 manual switch from summer to winter time
zone 1
on
8.3.21 Step 26, switching time manned/unmanned
LED zone 1 LED display Option Setting Key
red yellow figure 1 figure 2 point figure 3 figure 4
Function switching time 1 for automatic switching from manned to unmanned
1 default setting 1 8 . 0 0
2 individual setting
– press key 2 to adjust the hours
– press key 3 to adjust the minutes
zone 1
on x x . x x
Function switching time 2 for automatic switching from manned to unmanned
3 default setting -- -- . -- --
4 individual setting
– press key 2 to adjust the hours
– press key 3 to adjust the minutes
zone 1
on x x . x x
Procedure
1. Press key zone 1 until the red zone LED (switching time 1) or the yellow zone LED (switching time 2) is lit
2. Press numeric key 2 to set the hours (start with hour 00:xx to 23:xx upwards)
3. Press numeric key 3 to set the minutes (start with minute xx:00 to xx:59 upwards)
– Display “-- -- . -- --“ means no switching time set