Structure and function of the FT2080
3
75
Building Technologies A6V10380629_en--_a
Fire Safety 2015-09-10
You set the date and the time of the fire detection installation in the 'Set date / time'
dialog window. Use the corresponding buttons.
The time is entered in the format 'hh:mm:ss'. If the 12-hour clock format is used, a
button with 'AM / PM' is displayed next to the seconds indicator.
'Set duration' dialog window
'Set duration' dialog window
The duration of the 'Temporary isolation' command is set in the Set duration' dialog
window.
To Next Page
Loading...
