Siemens PhoneMail - Specifying the Mobility Number for Call Forwarding (Privilege)

Bedienung.fm
A31003-S2360-U106-2-7619, 2009-03-25
OpenScape Xpressions V6 PhoneMail, User Guide
63
Operating your Mailbox with OpenScape Xpressions PhoneMail
Using your own Mailbox (Direct Access)
2.2.6.6 Specifying the Mobility Number for Call Forwarding (Privilege)
You can use the mobility number specified here as target phone number in the programable forwarding mode.
You can also enter the mobility number via the
Web Assistant (Voice mail system page). You can
program the forwarding mode via the
Web Assistant only.
NOTE: You can only specify an external mobility number if your telephone connection allows making external
calls.
5 In the menu for editing the answering options: push 5.
You now have the following options:
1 Change mobility target number: push 1.
Or:
2 Activate function: push 2.
Or:
3 Deactivate function: push 3.
Or:
# Cancel, maintain mobility target number and status: push pound.
If you have pushed 1 the system prompts you to enter the mobility number.
# Enter mobility number followed by the pound key.
Enter the number exactly as you would from your office phone. Do not forget to prefix the
number with the code for the outside line (normally 0 or 9).