Siemens PhoneMail - Dialing Your Mailbox

Bedienung.fm
A31003-S2360-U106-2-7619, 2009-03-25
OpenScape Xpressions V6 PhoneMail, User Guide
89
Operating your Mailbox with OpenScape Xpressions PhoneMail
Using the Mailbox for Calls to your Cell Phone
2.6.2 Dialing your Mailbox
You can dial your own mailbox using the service access number for the Direct Access option (see also Section
2.2, “Using your own Mailbox (Direct Access)”, on page 28).
You can dial your own mailbox (Direct Access) from any (external) telephone:
You can use the callback access service if you dial the mailbox from your cell telephone (see Section 2.5, “Using
Fast Access and Access with the Mailbox Key (Callback Access)”, on page 86). The most practical option is to
store the access number for the callback access service in your cell phone address book.
Dialing your own mailbox from a cell phone (Callback Access):
NOTE: Activate the notification function (see Section 2.2.7.5, “Setting Notifications (Privilege)”, on page 73). An
SMS message will then be sent to your cell phone each time your mailbox receives a new message.
Enter the service access number for the direct access option including the CO number
of your company.
Please consult your system administrator if you do not know the access number.
# Enter your own phone number. Complete your entry by pushing the pound key.
Enter the number of the telephone at your workstation and not the number of your cell phone.
*#Enter your own name via the letter-number assignment: push star, enter name and complete
your entry with the pound key.
# Enter PIN. Complete your entry by pushing the pound key.
Enter the service access number for the Callback Access including the CO number of
your company.
Please consult your system administrator if you do not know the access number.
# Enter PIN. Complete your entry by pushing the pound key.
If your cell phone configuration allows polling voicemails without user identification, you need
not enter a PIN.