Bedienung.fm
A31003-S2360-U106-2-7619, 2009-03-25
OpenScape Xpressions V6 PhoneMail, User Guide
81
Operating your Mailbox with OpenScape Xpressions PhoneMail
Using your own Mailbox (Direct Access)
2.2.9 Accessing Conferences and Work Groups (Privileges)
If a connection between your Xpressions environment and OpenScape UC Application has been set up, you can
directly access the following OpenScape UC Application features without another identification.
2.2.10 Accessing the Unified Communcations System
If a connection between your Xpressions environment and OpenScape UC Application has been set up, you can
directly access the following OpenScape UC Application features without another identification.
You now have the following options:
Dial your own mailbox (see Section 2.2.1, “Dialing your own Mailbox”, on page 30).
2 Push key 2 in the main menu to access conferences and work groups.
You find further information about operating the functions available here in the OpenScape UC Application
manual.
Dial your own mailbox (see Section 2.2.1, “Dialing your own Mailbox”, on page 30).
6 Push key 6 in the main menu to access the Unified Communications system.
You find further information about operating the functions available here in the OpenScape UC Application
manual.
1 Set user presence: push 1.
Or:
2 Set preferred telephone: push 2.
Or:
6 Access calendar: push 6.
Or:
9 Change rule: push 9.
Or:
# Cancel and back to the main menu: push pound.
To Next Page
Loading...
