7 Operation at Use of a PC
7.3 Configuration of the Device
152 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
To change the Ethernet communication settings, proceed as follows:
✧ In the navigation window, select the Administrative menu and click Communication Ethernet.
The Communication Ethernet input/output window with Protocol Modbus TCP opens.
Figure 7-44 Configure Tab, Communication Ethernet via Modbus TCP Input/Output Window
✧ Enter the desired values in the fields and select the parameters in the list boxes and in the option field as
described in Table 7-18.
Download SNMP Device MIB File
✧ Select yes in the Enable SNMP option (see figure 7-44).
✧ In the Communication Ethernet input/output window, click Download SNMP device MIB file.
NOTE
The enabling of SNMP via option Enable SNMP is only required if you want to save the MIB file and use it in
a MIB browser.
NOTE
The SNMP protocol is implemented in SENTRON PAC5100/5200 in order to be able to retrieve manufacturer-
specific information.
To retrieve information via SNMP, a MIB browser and the MIB file are required. The MIB browser allows the
displaying of SNMP information objects and their content.
To Next Page
Loading...
