7 Operation at Use of a PC
7.4 Value View and Evaluation
160 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Measurement Output as Table
✧ Click Display.
The determined results are displayed in a table. In multi-paged tables you can navigate forward and back
in the pages using the >> and << buttons. If you want to view a certain page, enter the page at the bottom
and click on show.
The results can be displayed graphically using COMTRADE viewer (link in Diagram column).
Measurement Output as CSV File
✧ Click Download.
The Open/Save/Cancel button choice opens.
Figure 7-49 Open/Save/Cancel Button Choice
Save CSV File
✧ Select in the button choice Open/Save/Cancel Save Save As: see figure 7-7.
✧ Select the file path.
✧ Use the file name suggested in the File name: list box or enter a new file name with the file
extension *.csv.
NOTE
When an event has occurred, with this setting the recordings are marked in red on the record list under Find
result list. And a message is showed under the list when event happen. For information about the flagging con-
cept, please refer to Functioning of the Measuring System according to IEC 61000-4-30.
NOTE
The length of file names must not exceed 8 characters. Use only characters according to NOTE in Open Con-
figuration from File.
To Next Page
Loading...
