7 Operation at Use of a PC
7.5 Maintenance
179SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7.5.3.3 Min/Max Values (only SENTRON PAC5200)
To reset the min/max values, proceed as follows:
✧ In the navigation window, select the Presets menu and click Min/Max Values.
Figure 7-66 Maintenance Tab, Preset Min/Max Values
✧ Enter the maintenance password into the Password field.
✧ Click Reset Min/Max Values.
All min/max values are reset. The Action was successful indication is displayed on the status bar.
To Next Page
Loading...
