Technical Specifications
Number of outputs 8
Galvanic isolation yes
- in groups of 8
Load voltage L+
- rated value 5 to 24 V DC
- permissible range 4.75 to 30 V
(including ripple)
- value at t<0.5 s 35 V
Output current for
”1” signal
- rated value 100 mA
Output voltage TTL-compatible
*
Short-circuit protection none
Voltage induced on circuit
interruption (internal) limited to - 19 V (at 24 V)
Switching frequency
- resistive load max. 100 Hz
- inductive load max. 2 Hz
Paralleling of
outputs possible in pairs
- maximum current (0.8 x I
rated
)
Length of cable
- unshielded max. 100 m (330 ft.)
Rated insulation voltage
(+9 V to ) 12 V AC
- insulation group 1×B
- tested with 500 V AC
Current consumption
- from +9 V (CPU) typ. 20 mA
- from L+
(without load) typ. 28 mA
Power loss of the
module typ. 1 W
Weight approx. 220 g (8 oz.)
*
transistor with open collector,
switching to M potential
EMC Characteristics for Use in S5-95F
Electrostatic discharge
to IEC 801-2 Severity rating 3
tested with 8 kV air discharge
6 kV contact discharge
Electromagnetic fields
to IEC 801-3 Severity rating 2
tested with 3 V / m
Fast transient burst
to IEC 801-4 Severity rating 3
tested with 2 kV on supply lines
1 kV on signal lines