Siemens SIMATIC S7-300 Module data Function Manual

1 Introduction 03/2013
1.3 Operating Concept
© Siemens AG 2006-2013 All Rights Reserved
1-12 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
1.3 Operating Concept
--- PKI login
Fig. 1-1: Login
You can log in using:
• Password
• Password/certificate
• Certificate
This must be specified when a new user logs in or must be subsequently changed
for existing users:
Fig. 1-2: Necessary user data
Note
An e-mail address must be entered when logging in using the certificate.
If you have access to only a single organization on a server, the PKI login takes
you immediately to the Machine information page (the same page that opens when
you log in with a password).
If you have access to more than one organization, an intermediate page opens
where you can select one of the accessible organizations.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)