Siemens SIMATIC S7-300 Module data Function Manual

03/2013 5 Statistics/export
5.1 Multi-machine views
© Siemens AG 2006-2012 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
5-261
5.1.7 Comparing installed components
To compare installed components, a list of machines and the components installed
in them is shown. The components only exist for a machine after the machine has
been connected with an NCU.
Fig. 5-29: Component overview
Function Description Type
Filtering components
Select property The number of machines is limited by the
selection of the components. After filtering,
only machines are displayed that contain at
least one of the selected components.
SELECTION
Exclude property The number of machines is limited by the
selection of individual components. After
filtering, only machines are displayed that do
not contain any of the selected components.
SELECTION
Machines x - y of y
Machine ID Shows the currently selected machine
group. The list is empty and a corresponding
message is issued if a machine group is not
selected or if the currently selected group
does not contain any machine.
SELECTION
Fig. 5-30: Comparing components

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)