Siemens SIMATIC S7-300 Module data Function Manual

03/2013 2 Machine information
2.4 Archives
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
2-71
2.4 Archives
Constraint
The full range of functions to configure archive functions and reload archives is
available only with the SINUMERIK Operate operating software.
Function description
The control monitors in SINUMERIK Integrate permit archives (data backups) of
control systems to be created and saved in the server.
See also Section: Setting up functions, creating and uploading archives.
For SINUMERIK pl, archives can created and uploaded locally on the HMI
Advanced.
Fig. 2-44: Measurement series of a test series
Filtering archives
The list of archives or data backups is supported by filter functions.
Fig. 2-45: Filtering archives

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)