Siemens SIMATIC S7-300 Module data Function Manual

5 Statistics/export 03/2013
5.1 Multi-machine views
© Siemens AG 2006-2012 All Rights Reserved
5-238 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Fig. 5-3: Multi-machine events - event type filter
The display of the machine events is in strict chronological order for all selected
machines. Further functionalities in and with the data of the machine events are in
the event history of a machine, as described below.
5.1.2 Summary of machine events
Quantitative evaluation of the machine events
Two views are available to provide an overview of the frequency of events. To limit
the machines and the viewing period, the same filters are available as for viewing
multi-machine events.
One representation is a list of the machines sorted in descending order by the
number of events. The second representation is a list of the events (identified by
control name) sorted in descending order by their frequency.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)