Siemens SIMATIC S7-300 Module data Function Manual

4 Organizational tasks 03/2013
4.2 Service cases
© Siemens AG 2006-2013 All Rights Reserved
4-230 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
4.2.3 Requesting fault processing on the control
Function description
Fig. 4-7: Requesting fault processing on the control
Function Description Type
Please write a short fault report
Report fault
Fault report
In the event of a fault, a report can be sent
directly to the control via the operating
software which immediately leads to a fault on
transfer.
Since a name was not given to the fault help
request here, the first 40 characters are used
automatically as the fault name on the internet
PC.
DISPLAY
INPUT
(Max. 2000
characters;
any character
permissible)
Contact data
Requested by Irrespective of the person who is currently
logged on with SINUMERIK Integrate, the
person who made the request can enter
his/her details directly here. These identities
can be different.
DISPLAY
INPUT
Telephone
number
The person who made the request can leave
his/her telephone number for any other
questions that may arise.
DISPLAY
INPUT
(max. 15
digits)

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)