Siemens SIMATIC S7-300 Module data Function Manual

3 Setting up functions 03/2013
3.4 Fault services
© Siemens AG 2006-2013 All Rights Reserved
3-154 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3.4.15 Server trigger on "Trigger on due maintenance tickets"
Function description
In order to monitor the execution of maintenance procedures by acknowledging
maintenance jobs, this trigger can be used to respond on a specific basis to one or
several jobs with time delays that can be configured differently. A notification is
available as a response.
Fig. 3-41: Server trigger on "maintenance job due"
Function Description Type
Name Name of the trigger: If this is not entered, the
maintenance job (overdue) trigger is assigned:
Name of the maintenance schedule.... is named. If
the automatic name has already been assigned, it
does not change, even if a different maintenance
job is being monitored.
The automatic name of the maintenance schedule
is updated if a name is entered and then deleted
manually.
DISPLAY
INPUT
(max. 100
characters,
all characters
are
permissible)
Initiate
trigger when
- A mainte-
nance job
is due
If maintenance jobs are due, an individual
notification for a freely configurable group of
maintenance procedures can be sent. This does
not necessarily have to be identical to the
notification in the control monitor that triggers
maintenance.
DISPLAY
SELECTION
(Toggle)

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)