Siemens SIMATIC S7-300 Module data Function Manual

3 Setting up functions 03/2013
3.4 Fault Services
© Siemens AG 2006-2013 All Rights Reserved
3-172 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description Type
Deletes a maintenance schedule
Note:
Deletion is only possible if the schedule that is to be
deleted is not used in any other control monitors, or
controlled independently.
However, if a maintenance schedule that creates a job
in a control monitor is missing, this is documented and
displayed in an entry in the event history.
If the schedule becomes available again (i.e. a new
version is created), it will also be created in the right
format to act as a job.
ACTION
Notice
If diagnostic actions are also carried out in the control monitor that contains a
workflow action, it is essential for the entry in the machine event history to be
selected for the control monitor.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)