Siemens SIMATIC S7-300 Module data Function Manual

Foreword 03/2013
© Siemens AG 2006-2013 All Rights Reserved
4 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Target group
This publication is intended for project engineers, programmers, technologists (of
machine manufacturers), and system startup engineers (of systems/machines).
Prerequisite (area of validity)
This manual is valid for use with the following product versions:
Analyze MyCondition (AMC) Version 4.12
Access MyBackup (AMB) Version 4.12
Access MyMachine (AMM) Version 2.0
Benefits
The Function Manual describes the functions so that the target group is familiar
with and can select them. It provides the target group with the information required
to implement the functions.
Usage phase
Planning and configuration phase, implementation phase, setup and
commissioning phase.
Standard scope
Additions or revisions made by the machine manufacturer are documented by the
machine manufacturer.
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
For the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case
of installation, operation, or maintenance.
Technical support
You will find telephone numbers for other countries for technical support in the
Internet under http://www.siemens.com/automation/service&support


Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)