Siemens SIMATIC S7-300 Module data Function Manual

03/2013 3 Setting up functions
3.1 Maintenance
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-91
Function Description Type
Search
Maintenance schedule
Switch to the window to create a new empty
maintenance schedule.
ACTION
Switch to the window to edit an existing
maintenance schedule.
ACTION
Name Name of the maintenance schedule. DISPLAY
Icon "..." Display of an icon.
For example, hand icon is displayed if the
maintenance schedule requires activities to be
performed manually.
DISPLAY
Responsible
organization
Displays the organization responsible for the
maintenance schedule.
DISPLAY
Copies the maintenance schedule.
The next time you save the maintenance
schedule, it will be saved as a new maintenance
schedule. If you do not change the name, a
consecutive number will automatically be added.
ACTION
Deletes the maintenance schedule after a
prompt. If you cancel the prompt, the deletion
will not take place.
ACTION
Fig. 3-3: Editing a maintenance schedule
Function Description Type
Name Short name for the maintenance procedure. The
name can also be found in the overview of the
maintenance jobs in the PC and in the control.
DISPLAY
INPUT
(max. 100
characters;
all characters
are
permissible)
Responsible
organization
Organization allocated to carry out the job in this
schedule.
DISPLAY
SELECTION

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)