Siemens SIMATIC S7-300 Module data Function Manual

03/2013 3 Setting up functions
3.1 Maintenance
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-93
Function Description Type
File To provide more details about the task,
documents with more information can be
appended.
An attached file can be marked as being safety-
relevant in order to draw the attention of the
operator.
Note:
The machine operator at the operator panel can
only view documents in PDF format.
DISPLAY
ACTION
SELECTION
(Toggle)
Notice
Changes to maintenance schedules are not applied to pending maintenance jobs.
Changes to maintenance schedules are accepted in all maintenance jobs that
have still not been opened, are not due and not closed (also before they are due,
if available) at the latest when they become due (this can be identified as a result
of the missing pin symbol).

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)