General technical specifications
5.2 Standards Compliance
EIP-200S Ethernet/IP Adapter Distributed I/O System
92 System Manual, 06/2018, A5E44345053-AB
The ET 200S distributed I/O system satisfies requirements and safety related objectives
according to the EC directives listed below, and conforms to the harmonized European
standards (EN) for the programmable controllers listed in the Official Journals of the
European Community.
● EC Directive 2006/95/EC (Low Voltage Directive) "Electrical Equipment Designed for Use
within Certain Voltage Limits"
– EN 61131-2:2007 Programmable controllers - Equipment requirements and tests
● EC Directive 2004/108/EC (EMC Directive) "Electromagnetic Compatibility"
– Emission standard
EN 61000-6-4:2007: Industrial Environment
– Immunity standard
EN 61000-6-2:2005: Industrial Environment
● EC Directive 94/9/EC (ATEX) "Equipment and Protective Systems Intended for Use in
Potentially Explosive Atmosphere"
– EN 60079-15:2005: Type of Protection 'n'
The CE Declaration of Conformity is held on file and available to competent authorities at:
Siemens AktiengesellschaftAutomation and DrivesA&D AS RD4Postfach 1963D-92209
Amberg, Germany
Underwriters Laboratories Inc. complying with:
● Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment)
● Canadian Standards Association: CSA C22.2 Number 142 (Process Control Equipment)
200S distributed I/O system components meet the CSA standard.
The cULus logo indicates that the ET
200S distributed I/O system has been examined
and certified by Underwriters Laboratories (UL) to standards UL
508 and CSA 22.2
142.
To Next Page
Loading...
Need help?
General
