EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB
91
General technical specifications
General technical specifications
The general technical specifications comprise the standards and test specifications with
which the ET 200S distributed I/O system complies, as well as the criteria on the basis of
which the ET 200S distributed I/O system was tested.
Standards Compliance
Standards compliance
The ET 200S distributed I/O system design conforms with the following standards and test
specifications. The test criteria for the ET 200S distributed I/O system are based on these
standards and test specifications.
Note that not all ET 200S distributed I/O system components may be certified to these
standards, and certification status may change without notification. It is the user's
responsibility to determine applicable certifications by referring to the ratings marked on the
product. Consult your local Siemens representative if you need additional information related
to the latest listing of exact approvals by part number.
To Next Page
Loading...
Need help?
General
