Description of system components
8.3 Operator panel with display
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
127
Profiles
Enables selection of the display profiles for the main display. If a defined profile is no longer
supported by SIMOCODE pro, for example, due to a changed hardware configuration, the
start display will be shown instead of the default main display:
● IL1, IL2, IL3 [A] (default)
● Imax [A]
● IL1, IL2, IL3 [%]
● Imax [%]
● Imax, Cos phi
● Imax, UL1-N, Cos phi, S
● Imax, UL1-L2, Cos phi, S
● Imax, UL1-N, Cos phi, P
● Imax, UL1-L2, Cos phi, P
● In1/output AM1 [mA] (only if analog module 1 is present and configured)
● In2/output AM1 [mA] (only if analog module 1 is present and configured)
● In1/output AM2 [mA] (only if analog module 2 is present and configured)
● In2/output AM2 [mA] (only if analog module 2 is present and configured)
● Inputs AM 1 / inputs AM2 [mA]
● Max. temp. °C/°F TM1 (only if temperature module 1 is present and configured)
● Temperatures °C/°F TM1 (only if temperature module 1 is present and configured)
● Max. temp. °C/°F TM2 (only if temperature module 2 is present and configured)
● Temperatures °C/°F TM2 (only if temperature module 2 is present and configured)
● UL1-N, UL2-N, UL3-N
● UL1-L2, UL2-L3, UL3-L1
● Imax, UL1-N, Cos phi
● Imax, UL1-L2, Cos phi
● Imax, UL1-N °C/°F (temperature display TM1!
1)
)
● Imax, UL1-L2, °C/°F
1)
(temperature display TM1!
1)
)
● Calculator 1
● Calculator 2
● Energy consumed [kWh] (only if a current / voltage measuring module is configured).
To Next Page
Loading...
