Siemens SIMOCODE pro V MR

Technical data
15.2 Technical specifications of the SIMOCODE pro C / pro S / pro V PB / pro V MR basic units
SIMOCODE pro
336 System Manual, 05/2019, A5E40507475002A/RS-AD/004
Technical specifications of the SIMOCODE pro C / pro S / pro V PB / pro V MR basic units
Connection of SIMOCODE pro S basic unit
• Tightening torque
TORQUE: 5.2 lb.in to 7.0 lb.in
0.6 Nm to 0.8 Nm
• Connection cross sections
- Solid 2 x 0.5 mm
2
... 1.5 mm
2
; 1 x 0.5 mm
2
... 2.5 mm
2
2 x AWG 20 to 16 / 1 x AWG 20 to 14
- Finely stranded with end sleeve
2 x 0.5 mm
2
... 1.0 mm
2
; 1 x 0.5 mm
2
... 2.5 mm
2
- PROFIBUS cable 2 x 0.34 mm
2
/ 1 x 0.34 mm
2
AWG 22
1)
Note
Bus termination module
The bus termin
ation module is powered by a voltage of max. 5 V.
The current drawn for the bus termination module is limited.