Siemens SIMOTICS T-1FW3 - Page 101

Configuration
5.2 Configuring workflow
1FW3 complete torque motors
Configuration Manual, 08/2020, A5E46027705B AA
99
SINAMICS ALM 400 V line supply (600 V DC link voltage)
M in Nm; n in rpm
AP 1
= 400 Nm at 100 rpm
AP 2
= 0 Nm at 0 rpm
Figure 5-5 Selecting motors for load duty cycles with different on time 1FW3201-☐E☐