Motor components and options
4.2 Options
1FW3 complete torque motors
90 Configuration Manual, 08/2020, A5E46027705B AA
4.2 Options
When ordering a complete torque motor with options, "-Z" should be added to the article
number. The order code should also be specified for each option that is required.
Order codes must not be repeated in plain text in the order.
Table 4- 14 List of order codes
Motor protection using PTC thermistors (3 × PTC)
Manufacturer's test certificate
Sensor hole M8; DE and NDE
Terminal box GK 603 with removable front plate
Cable entry plate with 3 × M63 × 1.5 for 1XB7-700 terminal box
Cable entry plate with 4 x M63 x 1.5 for 1XB7-712 terminal box
Shaft cover at NDE for a hollow shaft
Special grease for low speeds
Paint finish, matt black RAL9005 paint finish
Paint finish, cream white RAL9001
Paint finish, reseda green RAL 6011
Paint finish, pebble gray RAL 7032
Paint finish, sky blue RAL 5015
Paint finish, light ivory RAL 1015
Paint finish, white aluminum, RAL 9006
Paint finish, pastel blue RAL 5024
Paint finish, papyrus white RAL 9018
Paint finish, gray white RAL 9002
X28 Paint finish, azure blue RAL 9009
Paint finish, mouse gray RAL 7005
X30 Paint finish, ivory RAL 1014
Paint finish, brilliant blue RAL 5007
Paint finish, pale green RAL 6021
Paint finish, traffic white RAL 9016
Paint finish, light gray RAL 7035
To Next Page
Loading...
Need help?
General