Siemens SIMOTICS T-1FW3 - Page 137

Configuration
5.4 Mounting
1FW3 complete torque motors
Configuration Manual, 08/2020, A5E46027705B AA
135
1FW3150....1FW3155
1FW3156
1FW3201....1FW3204 1FW3206....1FW3208
One clamping set is sufficient Two clamping sets are required to transmit the
torque
Clamping sets required to transmit the torque
Technical Support RINGSPANN GmbH
RINGSPANN GmbH can support you when selecting a suitable clamping system for your
application.
RINGSPANN GmbH
Phone +49 (0) 6172 275 0
Schaberberg 30-34
Internet: http://www.ringspann.de
D-61348 Bad Homburg