Siemens SINAMICS G120D Series - Page 47

Installation
4.2 Electrical Installation
Table 4- 11 Push-Pull variant PROFINET and 24 V DC connectors
Connector
Order number
24 V DC power supply
6GK1907-0AB10-6AA0
RJ45 PROFINET 6GK1901-1BB10-6AA0
Table 4- 12 Fibre optic connectors
Connector
Order number
IE SC RJ POF PLUG PRO
6GK1900-0MB00-6AA0
IE SC RJ PCF PLUG PRO 6GK1900-0NB00-6AA0
Table 4- 13 Mains connector
Power rating
cable size
Order number
0.75 kW … 1.50 kW
2.5 mm
2
(14 AWG)
3RK1911-2BE50
3.00 kW … 4.00 kW
4 mm
2
(12 or 10 AWG)
3RK1911-2BE10
5.50 kW … 7.50 kW
6 mm
2
(10 AWG)
3RK1911-2BE30
Order motor connector including temperature sensor and motor holding brake via solution
partner: Solution partner
(
https://www.automation.siemens.com/solutionpartner/partnerfinder/Partner-
Finder.aspx?lang=en)
Cable lengths
Table 4- 14 Maximum cable lengths
Cable
Screening
Max. length
Motor
1)
Screened
15 m (49 ft)
Unscreened
30 m (98 ft)
Temperature sensor
1)
Screened
15 m (49 ft)
Unscreened
30 m (98 ft)
Motor holding brake
1)
Screened
15 m (49 ft)
Unscreened
30 m (98 ft)
Digital inputs
Screened
30 m (98 ft)
Digital outputs
Screened
30 m (98 ft)
Analog input
Screened
30 m (98 ft)
Encoder
Screened
30 m (98 ft)
1)
The motor, temperature sensor and motor holding brake are connected through a hybrid cable to
the inverter using a Harting connector.
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
47