Siemens SINAMICS G120D Series - Page 57

Installation
4.2 Electrical Installation
Default setting 14: "Process industry with fieldbus"
DO 0: p0730, DO 1: p0731
DI 0: r0722.0, …, DI 5: r0722.5
Motorized potentiometer, setpoint after the ramp-function generator r1050
Speed setpoint (main setpoint): p1070[0] = 2050[1], p1070[1] = 1050
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
57