Siemens SINAMICS G120D Series - Page 56

Installation
4.2 Electrical Installation
Default setting 13: "Standard I/O with analog setpoint and safety"
DO 0: p0730, DO 1: p0731
DI 0: r0722.0, …, DI 5: r0722.5
AI 0: r0755[0]
Speed setpoint (main setpoint): p1070[0] = 755[0]
Converter with control units CU240D-2
56 Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB