Technical specifications
12.3 Technical specifications
Drive converter cabinet units
482 Operating Instructions, 07/07, A5E00288214A
12.3 Technical specifications
Note
The current, voltage and output values specified in the following tables are rated values.
The cables to the cabinet unit are protected by fuses with gL characteristic.
The connection cross-sections are calculated for three-core copper cables installed
horizontally in free air at an ambient temperature of 30 °C (86 °F) (in accordance with DIN
VDE 0298 Part 2 / Group 5) and the recommended line protection in accordance with DIN
VDE 0100 Part 430.
AWG (American Wire Gauge for cross-sections < 120 mm²);
MCM (Mille Circular Mil): American wire gauge for cross-sections > 120 mm
2
.
To Next Page
Loading...
