Siemens SINAMICS S150 - SMC10 Sensor Module for Determining the Actual Motor Speed and the Rotor Position Angle (Option K46); Description

Electrical installation
4.9 Other connections
Drive converter cabinet units
92 Operating Instructions, 07/07, A5E00288214A
4.9.16 SMC10 Sensor Module for determining the actual motor speed and the rotor
position angle (option K46)
4.9.16.1 Description
The SMC10 Sensor Module is used for determining the actual motor speed and the rotor
position angle. The signals emitted by the resolver are converted here and made available to
the closed-loop controller via the DRIVE-CLiQ interface for evaluation purposes.
The following encoders can be connected to the SMC10 Sensor Module:
● Resolver 2 pole
● Multipole resolver
/('V
01P
'5,9(&/L4LQWHUIDFH
(OHFWURQLFVSRZHUVXSSO\
(QFRGHUV\VWHPFRQQHFWRU
3URWHFWLYHFRQGXFWRUFRQQHFWLRQ
6KLHOGFRQQHFWLRQ
;
;
;
Figure 4-15 SMC10 Sensor Module