Siemens SINAMICS S150 - Preface; User documentation; Technical support

Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
5
Preface
User documentation
WARNING
Before installing and commissioning the converter, make sure that you read all the safety
notes and warnings carefully, including the warning labels on the equipment itself. The
warning labels must always be legible. Missing or damaged labels must be replaced.
Further information is available from:
Technical support
● Tel: +49 (0) 180 50 50 222
● Fax: +49 (0) 180 50 50 223
● Internet: http://www.siemens.de/automation/support-request
Internet address
Information about SINAMICS can be found on the Internet at the following address:
http://www.siemens.com/sinamics