Siemens SINAMICS S150 - 2.3 Structure

Device overview
2.3 Structure
Drive converter cabinet units
22 Operating Instructions, 07/07, A5E00288214A
2.3 Structure
The SINAMICS S150 drive converter cabinet units are characterized by their compact,
modular, and service-friendly design.
Line and motor-side components as well as additional monitoring devices can be installed in
the converter cabinet units.
A wide range of electrical and mechanical components enable the drive system to be
optimized in line with prevailing requirements.
The cabinet unit comprises up to two cabinet panels with a total width of between 1400 mm
and 2800 mm, depending on the output.
'RRULQWHUORFN
(PHUJHQF\VWRS
2SHUDWRUSDQHO
9HQWLOLDWLRQJULOOHV
GHSHQGLQJRQ
GHJUHHRISURWHFWLRQ
0DLQFLUFXLWEUHDNHU
4
Figure 2-1 Example of a cabinet unit (e.g. 132 kW, 400 V 3 AC) (certain components optional)