Commissioning
5.2 STARTER commissioning tool
Drive converter cabinet units
116 Operating Instructions, 07/07, A5E00288214A
5.2 STARTER commissioning tool
Description
You can use the STARTER commissioning tool to configure and commission SINAMICS
drives and drive systems. The drive can be configured using the STARTER drive
configuration Wizard.
Note
This chapter shows you how to carry out commissioning using STARTER. STARTER
features a comprehensive online help function, which provides detailed explanations of all
the processes and available system settings.
For this reason, this chapter only describes the individual commissioning steps.
Prerequisites for installing STARTER
Hardware requirements:
● PG or PC with:
● Windows 2000: Pentium II 400 MHz, 256 MB RAM (512 MB recommended)
● Windows XP: Pentium III 500 MHz, 256 MB RAM (512 MB recommended)
● 1024 x 768 pixel screen resolution
Software requirements:
● Either Windows 2000 SP3 or SP4
● or Windows XP SP1 or SP2
● or Windows Server 2003 SP1
● and Internet Explorer V6.0
5.2.1 Installing STARTER
STARTER is installed using the "setup" file on the CD supplied. When you double-click the
"Setup" file, the installation Wizard guides you through the process of installing STARTER.
To Next Page
Loading...
