SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status codes in the "Remarks" column:
A ....
New documentation.
B ....
Unrevised reprint with new Order No.
C ....
Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated by a
new edition coding in the header or that page.
Edition Order No. Remarks
02.95 6FC5298-2AB00-0BP0 A
04.95 6FC5298-2AB00-0BP1 C
12.95 6FC5298-3AB10-0BP0 C
03.96 6FC5298-3AB10-0BP1 C
08.97 6FC5298-4AB10-0BP0 C
12.97 6FC5298-4AB10-0BP1 C
12.98 6FC5298-5AB10-0BP0 C
08.99 6FC5298-5AB10-0BP1 C
04.00 6FC5298-5AB10-0BP2 C
This manual is part of the documentation on CD-ROM (
DOCONCD
)
Edition Order No. Comment
04.00 6FC5 298-5CA00-0BG2 C
Trademarks
SIMATIC

, SIMATIC HMI

, SIMATIC NET

, SIROTEC

, SINUMERIK

and SIMODRIVE

are Siemens
trademarks. The other designations in this publication may also be trademarks, the use of which by third
parties may constitute copyright violation.
Further information is available on the Internet under:
http://www.ad.siemens.de/sinumerik
This publication was produced with WinWord V 8.0
and Designer V 7.0.
The reproduction, transmission or use of this document or its contents is
not permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration
of a utility model or design, are reserved.
© Siemens AG 1996–2000. All rights reserved
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
We have checked that the contents of this document correspond to the hardware
and software described. Nonetheless, differences might exist and therefore we
cannot guarantee that they are completely identical. The information contained in
this document is, however, reviewed regularly and any necessary changes will be
included in the next edition. We welcome suggestions for improvement.
Subject to change without prior notice.
Order No. 6FC5298-5AB10-0BP2
Printed in the Federal Republic of Germany
Siemens Aktiengesellschaft
To Next Page
Loading...
Need help?
General
