15
04.00 Tables
15.2 List of s
stem variables
15
ï›™
Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
15-531
15.2.11 Magazine location data for OEM users
Identifier Type Description: System variable/value range/index Part pro Sync O S
$TC_MPPC1
INT The type can be defined in the machine data. The default is INT
$TC_MPPC1[n,m]
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPPC2
INT The type can be defined in the machine data. The default is INT
$TC_MPPC2[n,m]
n: Physical Magazine number
m: Physical location number
RW 2
...
...
$TC_MPPC10
INT The type can be defined in the machine data. The default is INT
$TC_MPPC10[n,m]
n: Physical Magazine number
m: Physical location number
RW 2
$TC_MPPCS1
INT The type can be defined in the machine data. The default is INT
$TC_MPPCS1[n,m]
n: Physical Magazine number
m: Physical location number
RW 5
.
2
$TC_MPPCS2
INT The type can be defined in the machine data. The default is INT
$TC_MPPCS2[n,m]
n: Physical Magazine number
m: Physical location number
RW 5
.
2
...
...
$TC_MPPCS10
INT The type can be defined in the machine data. The default is INT
$TC_MPPCS10[n,m]
n: Physical Magazine number
m: Physical location number
RW 5
.
2