Siemens SINUMERIK 810D - Page 492

15
Tables 12.98
15.1 List of instructions
15

Siemens AG 2000. All rights reserved
15-492
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
FPO Feed characteristic programmed via a
polynomial
(feed polynomial)
Real Quadratic, cubic
polynomial
coefficient
FPR Rotary axis identification 0.001 ...
999999.999
FPR (rotary axis)
FPRAOF Deactivate revolutional feedrate
FPRAON Activate revolutional feedrate
FRAME Data type to define the coordinate system Contains for each
geometry axis:
Offset, rotation,
angle of shear,
scaling, mirroring;
For each special
axis:
Offset, scaling,
mirroring
FRC Feed for radius and chamfer s
FRCM Feed for radius and chamfer modal m
FTOC Change fine tool offset As a function of a
3rd degree
polynomial defined
with FCTDEF
FTOCOF
1,6
Online fine tool offset OFF
(fine tool offset OFF)
m33
FTOCON
6
Online fine tool offset ON
(fine tool offset ON)
m33
FXS Travel to fixed stop ON (fixed stop) Integer,
without sign
1 = select,
0 = deselect
m
FXST Torque limit for travel to fixed stop
(fixed stop torque)
% Optional setting m
FXSW Monitoring window for travel to fixed stop
(fixed stop window)
mm, inch or
degree
Optional setting