Siemens SINUMERIK 810D - Page 496

15
Tables 12.98
15.1 List of instructions
15

Siemens AG 2000. All rights reserved
15-496
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
G643 Block-internal corner rounding m10
G700 Dimensions in inch and inch/min m13
G710
1
Metric dimensions in mm and mm/min m13
G810
1
, ...,
G819
G group reserved for OEM users 31
G820
1
, ...,
G829
G group reserved for OEM users 32
G961 Constant cutting speed ON without additional
spindle rotation
G961 S... LIMS=... F... m 15
G971 Constant cutting speed OFF m15
GEOAX Assign new channel axes to geometry axes 1 – 3 Without parameter:
MD settings
effective
GET Assign machine axis/axes Axis must be
released in the
other channel with
RELEASE
GETD Assign machine axis/axes directly See GET
GETACTT Get active tool from a group of tools with the same
name
GETSELT Get selected T number
GETT Get T number for tool name
GOTOF Jump instruction forwards (towards the end of program)
GOTOB Jump instruction back (towards start of program)
GWPSOF Deselect constant grinding wheel peripheral speed
(GWPS)
GWPSOF (T No.) s
GWPSON Select constant grinding wheel peripheral speed
(GWPS)
GWPSON (T No.) s
H... Auxiliary function output to PLC Real/INT Settable via MD
(machine manufact.)
H100 or H2=100
I
4
Interpolation parameter Real s
I1 Intermediate point coordinate Real s
IC Incremental dimension setting 0, ...,
±
99999.999
°
X=IC(10) s
IDS Identification of static synchronized actions
IF Introduce conditional jump Structure: IF –
ELSE – ENDIF
INDEX Define index of character in input string 0, ...,
INT
String: Parameter 1,
character:
Parameter 2
INIT Select block for execution in a channel
INT Data type: Integer with leading sign – (2
31
-1), ...,
2
31
-1