Siemens SIPROTEC 5 Hardware Description

Power-Supply Module of Non-Modular Devices (7xx82)
Power-Supply Module PS101
Description
The power-supply module PS101 is always permanently installed in the 1/3 module. The following can be
found on the PS101 module:
•
2 positions for plug-in modules (communication modules, measuring-transducer modules)
•
Terminals for time synchronization and an integrated Ethernet interface
•
A 14-pole voltage terminal (3 binary inputs, 3 binary outputs and connection for power supply)
•
Battery for the CPU
The following 3 variants are available for the rated voltage range:
•
DC 24 V to 48 V
•
DC 60 V to 125 V
•
DC 110 V to DC 250 V and AC 100 V to AC 230 V (50 Hz and 60 Hz)
3.3
3.3.1
3.3.1.1
Electronic Modules
3.3 Power-Supply Module of Non-Modular Devices (7xx82)
104 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC