Siemens SIPROTEC 5 Hardware Description

On-Site Operation Panels
Description
Operating Concept
The operating concept is based on 4 groups:
•
Navigation in the menu tree
•
Modification of settings
•
Display of measured values and protocols
•
Control function from menu bar or control display
Operating personnel are informed about the current state of important measured data, indications, and
parameters. The data can be read out. You can perform parameterization and switching operations directly on
the device.
User Interface Language
You can set the user interface language to the following:
•
Local language
•
US English
•
IEC 61850
Variants
Corresponding to the equipment configuration, 3 variants are available for each size. In the case of the non-
modular devices, only the front variants with small and large display are available.
[dwvaosop-080211-01.tif, 3, --_--]
Figure 2-19 Variants 1/3 Views
2.4
2.4.1
Forms of Devices and On-Site Operation Panels
2.4 On-Site Operation Panels
SIPROTEC 5, Hardware Description, Manual 37
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC