Siemens SIPROTEC 5 Hardware Description

Hardware Characteristics of Non-Modular Devices (7xx82)
A non-modular device always consists of just 1 module (1/3 of 19 inches) and cannot be expanded with
expansion modules (1/6 of 19 inches). These hardware characteristics are:
•
Module size: 1/3 of 19 in.
•
Type of construction: Flush-mounting devices with on-site operation panel fitted directly on the device
The on-site operation panels can be selected from 2 variants:
•
With a large display, keypad, and 16 two-colored LEDs
•
With a small display, keypad, and 16 two-colored LEDs
The module always contains the power-supply module PS101 and an input and output module IO10X. The
input and output module IO10X includes the terminals for current and voltage transformers. Optionally, the
module can be equipped an additional input and output module IO110 for extra binary inputs and outputs.
The plug-in modules are available for various applications. You can find more information on the available
plug-in module types in chapter 4 Plug-In Modules.
Introduction
1.2 Modular Systems and Hardware Characteristics
18 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Specifications

General

Brand	Siemens
Model	SIPROTEC 5
Category	Controller
Language	English