Siemens SIPROTEC 5 Hardware Description

Humidity
Permissible humidity stress
(according to IEC 60068-2-30)
≤ 75 % relative humidity on the annual average
Up to 93 % relative humidity on 56 days a year
Devices subjected to condensation are not to be oper-
ated!
Arrange the devices so that they are not exposed to
direct sunlight or extreme temperature changes. This
will prevent condensation in the device.
Constant humid heat, 56 days 40 °C, 93 % relative humidity
Humid heat, cyclical 12 h + 12 h cycles
25 °C/55 °C/95 % relative humidity
Other Environmental Information
Maximum altitude above sea level 2000 m (6561.68 ft)
Minimum admissible atmospheric pressure 783.8 hPa
Technical Data
6.9 Environmental Conditions
SIPROTEC 5, Hardware Description, Manual 207
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC