Siemens SIPROTEC 5 Hardware Description

Group Accessories
Terminal Type A current terminal, 3 x protection and 1 x measurement
(for modular devices)
Terminal Type A current terminal, 4 x measurement
(for modular devices)
Terminal Type B current terminal, 4 x protection
(for non-modular devices)
Terminal Type B current terminal, 3 x protection and 1 x measurement
(for non-modular devices)
Terminal 2-pole cross connector for current terminal
Terminal
Terminal pair printed circuit board assembly IO110
18
Terminal
Terminals and shielding for IO111
19
,
20
Terminal
Terminal kit for IO230/231
18
Terminal 2-pole cross connector for voltage terminal
Terminal Cover for current terminal block
Terminal Cover for voltage terminal block
Terminal Cover for empty plug-in module positions
Terminal Transport safety, current terminal
Terminal Transport safety, voltage terminal
Accessories USB covers (10 pieces each for CP 100, 200, 300)
Accessories Cable, integrated operation panel, 0.43 m
Accessories Cable, detached operation panel, 2.50 m
Accessories Cable, detached operation panel, 5.00 m
Accessories Cable set, COM link cable
Accessories Cover plate for plug-in modules
Accessories Set of angle rails
Accessories 10 x labeling strip, LEDs/function keys
Accessories 5 x labeling strips, push-buttons
Accessories Set of parts, mounting bracket 1/2
Accessories Set of parts, mounting bracket 2/3
Accessories Set of parts, mounting bracket 5/6
Accessories Set of parts, mounting bracket 1/1
Accessories 4 x screw cover 1/3, type C11
Accessories 4 x screw cover 1/3, type C22
Accessories 4 x screw cover 1/6, type C21
Accessories 2 x bus termination plate
Accessories Assembly frame for panel surface mounting for non-modular
7xx82 devices
Accessories SDHC memory card for 7KE85
Accessories 10 x battery holder
Accessories Connecting cable for 2nd row
Accessories DIGSI 5 USB cable 2.0
Sensors for arc protection Point sensor with line length of 3 m
Sensors for arc protection Point sensor with line length of 4 m
Sensors for arc protection Point sensor with line length of 5 m
Sensors for arc protection Point sensor with line length of 10 m
19
The set consists of terminals and shielding for the IO111 for the terminal positions of M and N.
20
Only for non-modular devices 7xx82
Ordering Information
7.1 Ordering Spare Parts and Accessories
SIPROTEC 5, Hardware Description, Manual 245
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC