' $ ! $!& #$"&&"! (%& !' $$ !"
⋅
72 F–TYPE function type (for VDEW interface)
min. 1
max. 254 ––––
72 PC–IN functional scope of the PC interface
DIGSI V3 [ ] DIGSI V3
ASCII [ ] ASCII
VDEW–com [ ] VDEW–compatible
72 GAP transmission gaps on the PC interface
min. 0.0 s
max. 5.0 ––––
72 BAUD baud rate of the PC interface
9600BAUD [ ] 9600 baud
19200 BD [ ] 19200 baud
1200BAUD [ ] 1200 baud
2400BAUD [ ] 2400 baud
4800BAUD [ ] 4800 baud
72 PARIT parity of the PC interface
DIGSI V3 DIGSI V3
ODD1ST odd parity 1 Stop
NO2ST no parity 2 Stop
NO3ST no parity 1 Stop
74 FLT REC. – fault recording
74 FLT F trigger/storage condition for fault recording
SV.ACT save with fault detection
SV.OFF save with TRIP
ST.OFF start at TRIP
74 T MAX max. length per recording T–max
min. 0.30 s
max. 5.00 ––––
74 T LEAD pre–fault time T–lead
min. 0.05 s
max. 0.50 ––––
74 T FOL post–fault time T–follow
min. 0.05 s
max. 0.50 ––––
95 SYST – system settings
95 TEST activate internal test
NONE [ ] none
WITH IND. [ ] with indication
ERR–MONI [ ] Errbuf full=>Monitor
95 MODULE number of module to be tested
min. 0
max. 100 ––––
To Next Page
Loading...
