SIREMOBIL Compact SPR2-130.061.02 Page 18 of 28 Siemens AG
System Manual Rev. 11 09.04 CS PS 24 Medical Solutions
6 - 18 Replacing boards / replacing components
• Configure the following parameters in User setup for MEMOSKOP:
Display of realtime clock Configure Yes. Select No only upon customer request.
Display of rotated image Configure Yes.
Monitor zoom Configure No.
Monitor split Configure Yes.
Monitor text Configure Yes.
Maximum image number Configure 100.
Disable dose rate selection
in user setup
Set to "No" if equipped with an area dose product mea-
surement device. Menu "Storage of Dose on disk" and
menu "Dose on Hardcopy output" in User setup are visi-
ble. Otherwise, set to "Yes".
Unit serial number Program the serial number of the SIREMOBIL Compact.
Do not enter the first zero.
Product name SIREMOBIL Compact (default). If wrong, configure
"SIREMOBIL Compact".
Default Program changeable Default: Yes.
Depending on country specific regulations configure Yes
or No.
Create External disk Configure No.
Default LUT Configure 2. Program a different LUT curve only upon
customer request.
Default edge Configure 1. Program a different Edge enhancement
value only upon customer request.
Software backward compatible Configure No.
Operating mode Parameters Change the programmed parameters only upon cus-
tomer request.
VCR output Configure to monitor A.
Hardcopy Release For SIREMOBIL Compact with 1 monitor:
configure to monitor A.
For SIREMOBIL Compact with 2 monitors:
Configure to monitor B.
Text monitor For SIREMOBIL Compact with 1 monitor:
configure to monitor A.
For SIREMOBIL Compact with 2 monitors:
configure to both monitors.
Split screen Configure horizontally. Configure vertically only upon
customer request.
Display of time Configure Yes.
Set Date Time Set the current date and time.
To Next Page
Loading...
