Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI High Feature
SIRIUS 3RW55 soft starter
Manual, 08/2018, A5E35630887002A/RS-AB/002
49
Procedure with IP65 door mounting kit
● Insert the seal of the door mounting kit onto the 3RW5 HMI High Feature ① and place
the 3RW5 HMI High Feature into the cutout of the cabinet door
②.
● Continue to screw the screws into the fixing brackets
③ until they protrude approx. 8 mm
at the front. Fasten the fixing brackets onto the 3RW5 HMI High Feature
④.
● Tighten the 3RW5 HMI High Feature with a tightening torque of 0.3 ... 0.35 Nm
⑤.
Ensure that the fixing brackets with marking "002" are used.
To Next Page
Loading...
