Group Bit Alarm ID Restrictions Associated alarm
class
Alarm items 6
(Simulation alarms)
0 Mass flow simulated 160 FC
1 Volume flow simulated 161 FC
2 Density simulated 162 FC
3 Medium temperature simulated 163 FC
4 - 5 Reserved
6 Standard volume flow simulated 166 FC
7 Totalizer 1 simulated 167 FC
8 Totalizer 2 simulated 168 FC
9 Totalizer 3 simulated 169 FC
10 Loop current simulated 170 FC
11 Product firmware incompatible 171 MA
12 Transmitter FW incompatible 172 MA
13 Sensor FW incompatible 173 MA
14 Display FW incompatible 174 MA
15 IO FW incompatible 175 MA
16 Sensor type incompatible 176 MA
17 Device is starting 177 FC
18 Display configuration version mismatch 178 MA
19 Alarm class simulation enabled 179 -
20 Reserved 180
21 SensorFlash Chkdsk failed 181 MA
23 Reserved 183
24 Reserved 184
25 Reserved 185
26 Channel 3 input current too low 186 If channel configured
to analog input
PA
27 Channel 3 input current too high 187 PA
28 Channel 3 external failure 188 PA
29 Channel 4 input current too low 189 If channel configured
to analog input
PA
30 Channel 4 input current too high 190 PA
31 Channel 4 external failure 191 PA
Modbus communication
A.9 Modbus holding registers tables
SITRANS FST030 (Modbus)
296 Operating Instructions, 08/2018, A5E37367739-AD
To Next Page
Loading...
