Siemens SITRANS SCM IQ - Basic Safety Notes SITRANS MS200; Lithium Batteries; Halogen and Silicone; ESD Guideline

• The device can be identi󹪝ed by collecting MAC/UID information from the system.
• Note that the debug interface X14 on the motherboard is used for development purposes.
• The micro USB port is only allowed to be used by Siemens personal.
2.6 Basic safety notes SITRANS MS200
2.6.1 Lithium batteries
Lithium batteries are primary power sources with high energy content designed to provide the
highest possible degree of safety.
WARNING
Potential hazard
Lithium batteries may present a potential hazard if they are abused electrically or mechanically.
Observe the following precautions when handling and using lithium batteries:
• Do not short-circuit, recharge or connect with false polarity.
• Do not expose to temperatures beyond the speci󹪝ed temperature range.
• Do not incinerate.
• Do not crush, puncture or open cells or disassemble.
• Do not weld or solder to the battery’s body.
• Do not expose contents to water.
2.6.2 Halogen and silicone
Note
SITRANS MS200 may contain traces of halogen and silicone.
2.6.3 ESD Guideline
Electrostatic sensitive devices are labeled with an appropriate symbol.
Safety notes
2.6Basic safety notes SITRANS MS200
SITRANS CC220 and SITRANS MS200
20 Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA