Siemens SITRANS SCM IQ - Introduction; Purpose of this Documentation; Document History; FW Revision History

Introduction
1
1.1 Purpose of this documentation
These instructions are a brief summary of important features, functions and safety information,
and contain all information required for safe use of the device. Read the instructions carefully
prior to installation and commissioning. In order to use the device correctly, 󹪝rst review its
principle of operation.
The instructions are aimed at persons who install and commission the device.
To realize optimum performance from the device, read the complete operating instructions.
1.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition Remark
10/2023 First edition
1.3 FW revision history
SITRANS CC220
Firmware revision Date Changes
1.01.00 12/2022 New hardware, 󹪝rmware update with USB stick
1.00.01 11/2021 Stability improvement
1.00.00 08/2021 Initial release
SITRANS MS200
Firmware revision Date Changes
1.0.0 08/2021 Initial release
1.4 Designated use
Use the device in accordance with the information on the nameplate and in the Technical
speci󹪝cations (Page63).
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA 7